Configure Astaro Security Gateway to failover between Multiple WAN links

  • Article ID: 115321
  • Rating:
  • 4 customers rated this article 3.3 out of 6
  • Updated: 29 May 2012

Known to apply to the following Sophos product(s) and version(s)


Sophos UTM Software Appliance

Operating systems
V7

What To Do

Configure Astaro Security Gateway to failover to alternate WAN links


1 – Confirm that all network interfaces are properly defined and configured under Network > Interfaces > Interfaces tab. 

 2 – Under Network > Interfaces > Uplink balancing tab click Enable. 

  2a – Select Failover from the Type drop-down menu. 

  2b – Click the folder icon in the Interfaces box to display the interface list, drag and drop all  WAN links to be used into the Interfaces: box. (Note: in case of link failure, interfaces will be  used in the order displayed, it is critical to have the interfaces in the correct order. Use the blue  arrows to change interface order as appropriate). 

  2c – Leave the Automatic monitoring checkbox selected, or clear the checkbox and add specific hosts to use for monitoring into the Monitoring hosts: field. Monitoring hosts are used for regular ping checks to verify interface connectivity for all interfaces, and therefore must be available from all interfaces. Click Apply to save your settings.

 
If you need more information or guidance, then please contact technical support.

Rate this article

Very poor Excellent

Comments