SafeGuard Easy multi-platform 4.5x
Windows 2000 Professional, Windows XP
Scenario: On an IBM/Lenovo machine, both SafeGuard Easy 4.5x and Rescue and Recovery (RnR) version 2.x are in use.
Is it possible to update the Rescue and Recovery version (e.g. to version 3.x) without reinstallation of SafeGuard Easy? What has to be considered?
Yes, it is possible to update Rescue and Recovery without uninstallation of SafeGuard Easy.
However, some additional steps are mandatory to ensure the SafeGuard Easy encryption drivers are included in the Rescue and Recovery partition.
After updating Rescue and Recovery, follow the steps outlined below:
1. Do not restart after the Rescue and Recovery update.
2. Start MBRsync.exe from the SafeGuard Easy program directory to update the RnR changes in the MBR.
3. Start WinPERepair.exe from the SafeGuard Easy program directory to add the SafeGuard Easy encryption drivers to the RnR partition.
4. Reboot the system.
See also chapter 22 in the SafeGuard Easy manual (SafeGuard Easy and IBM Thinkvatage Technologies - Rescue and Recovery with Rapid Restore)
During an update of Rescue and Recovery the SafeGuard Easy encryption drivers will be removed and the MBR will be changed. If the encryption drivers are not re-added again a BSOD (Blue Screen) will appear the next time you start the RnR partition.
A list of the supported Rescue and Recovery versions can be found in the user manual of SafeGuard Easy
keywords: bluescreen, sge